This past month, custom buttons were received from HESCO for the right drawer. These include controls for the second piano and other “important” things like the tuned beer bottles…
Speaking of the piano, I have wired in a 12 volt relay in the control cabinet to connect Uniflex to the vacuum pump relay. This pump will sit in and run the upright piano in the tone chute. It isn’t desirable to have the pump run all the time, so a button in the console drawer will activate the pump.
Finally, the xylophone was gone through and wired up with a plug. I am now done pre-wiring percussions!
Check out this page for project updates!