Thanks to EMS Industrial for constructing the control panel for the organ. Although quite unnecessary, it will sure be neat to watch the meters dance around when the organ fires up and plays! The panel offers readings on logic rectifier voltage, magnet rectifier volts and amps, blower 1, 2 and vacuum pump wind and controls for the frequency drives that power the blowers. In addition to those functions, you can manually start the blowers individually as well as the rectifiers and vacuum pump. The instrument will normally be controlled by a single switch next to the relay counter upstairs.... but that is boring in nature so thus this panel!
0 Comments
Leave a Reply. |
The BlogCheck out this page for project updates! Archives
August 2024
Categories |